2009 Cat D10T, RJG series, low hour components, Erops, U Blade w/ twin Tilt, Single Shank Ripper, Very good condition, from reputable outfit. Read the Details -
· RJG Series · 31,163 total frame hours, (low hr components, read below) · 6,903 hours of idle time since rebuilds, as indicated by ECM · Enclosed Cab, A/C, Heat · Single Shank Ripper, hyd pin puller. No shank with machine · U blade w/ twin tilt · Engine Enclosures · Light Kit · Cold weather kit · Fast Fuel Kit · Clean sheet metal · Cat C27, 646 HP Engine, Tier 3 · 147,000 operating weight
Component Hours as follows, complete powertrain rebuild May 2011 · 6,537 hours on Engine · 6,537 hours on Torque Converter · 6,537 hours on Transmission · 6,537 hours on Both Final Drives · 6,537 hours on Both steering clutches & brakes
Undercarriage measures as follows, (Based on Cat spec, w/ 120% remaining being new) Cat Brand UC components, part # 320-3054 · Rail/Chains measure 14% Remaining · Pads/Grousers measure 64% Remaining – 28” Wide Pads · Sprockets measure 120% Remaining (“sprockets are New”) · Front Idlers measure 44% Remaining · Rear Idlers measure 4% Remaining · Bottom Rollers measure average 30% Remaining · We can install New Undercarriage components for additional cost
This machine is just in, from outfit that ceased operations, was under excellent preventative maintenance program. The machine is mechanically sound, Cat TA2 testing report completed to Caterpillar specifications. Freshly serviced all oils and filters. We just ran this machine thru our sandblast, and paint bay. Painted with OEM quality polyurethane and factory decals. This unit was not a Rock machine, prior usage was stripping overburden at mine site. Track frames are clean and solid. The rails have some time left, but are on run out. We are offering this machine wholesale, please call for additional information available for this machine– · Detailed Pictures · Video of the machine operating · Cat ECM computer download on machine · Cat TA2 report available
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Priced to sell wholesale. Nationwide Delivery, Export, and Financing available at very good rates. Call Josh @ 563-872-4112 or email Sales@jjscheckel.com.