2015 Cat 930K, Hi Lift, Wheel Loader, A02415
2015 Cat 930K, Hi Lift Boom, 3,441 hours, of those, 1,522 hours were at Idle, as indicated by the ECM. Only 1,919 actual operating hours on this loader. Ride Control, Aux Hydraulics plumbed, Matching Bridgestone, 20.5 R25 Radials, 6.5 yard, hi capacity bucket w/straight edge. Read the details!
· RHN Serial Number Prefix
· Original Paint, Original Condition
· Hi Lift Arrangement (Extra 2 feet of boom)
Stats from ECM
· 3,441 Frame Hours
· 1,522 hours were Idle time, ECM verified
· Only 1,919 actual operating hours, ECM Verified
· Average lifetime RPMs = 1,078
· 1.93 GPM, average lifetime fuel rate
· 23% Lifetime load factor
· Very low utilization machine
· Ride Control equipped
· Wheel Steering
· Joystick Controls
· Cold Weather package installed
· Auxiliary Hydraulics
· Cat Bucket, part # 345-2766, 6.5 Yard material bucket. w/ straight edge
· 160 HP, Cat C6.6 Accert engine
· 31,500 Pound operating weight
· 108” wide bucket
· Hi Lift arrangement gives 2 extra feet of boom length over standard boom machines
· 18’9” total reach, top of bucket height
· 11’2” total dump clearance, with boom up, and bucket tilted down at 45 degree angle
Lease / Rental / Finance programs available for this machine.
Matching Bridgestone, Radial 20.5 R25, Tires
· Front LH tire measures 15/32nds, or 36% Remaining
· Front RH tire measures 12/32nds, or 28% Remaining
· Rear LH tire measures 14/32nds, or 33% Remaining
· Rear RH tire measures 17/32nds, or 40% Remaining
New Tires of customer’s choice, can be installed at additional cost.
This machine is just in, original hours, original paint, Hi Lift Option which is hard to find, Auxiliary hydraulics, This loader is straight & clean as they come, All pins & bushings in linkage are tight. No leaks, good solid machine all the way around, Search the market and compare prices, hours, and quality. This machine comes to the top.
This machine is currently getting an extensive Pre sale work order, including a full Cat TA2 technical inspection of all component pressures and settings to cat spec, we are also servicing all oils and filters on the machine, along with several other pre sale procedures. Please call or email for additional information, which we can email you – this machine will be ready to go.
We invite your own personal, or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures, and Video, available for this machine, on our website. www.jjscheckel.com - Priced to sell!