P. 563-872-4112 | F. 563-872-5058 | Email: office@jjscheckel.com | 21582 Hwy 62, Bellevue, IA 52031

JJ SCHECKEL EQUIPMENT FOR SALE

Remanufactured Equipment

Cat D11R Crawler Tractors, “SSR” Scheckel Series Reman Machines. Full Specs, Full Rebuild Units, Full Warranty, Building daily for stock, Call or Email to Reserve your Tractor Today, Limited Availability. The highest quality, most detailed, most complete machine rebuild program in the... Additional Details & Photos

Caterpillar D10R Crawler Tractors, “SSR” Scheckel Series Reman Machines. Full Specs, Full Rebuild Units, Full Warranty, Building daily for stock, Call or Email to Reserve your Tractor Today, Limited Availability. The highest quality, most detailed, most complete machine rebuild progra... Additional Details & Photos

Caterpillar D9R Crawler Tractors, “SSR” Scheckel Series Reman Machines. Full Specs, Full Rebuild Units, Full Warranty, Building daily for stock, Call or Email to Reserve your Tractor Today, Limited Availability. The highest quality, most detailed, most complete machine rebuild program... Additional Details & Photos

Crawler Tractors

2008 Cat D10T, RJG series, Low Hour component History, Erops, U Blade w/ twin Tilt, rear Cwt, Very good condition, from reputable outfit. Read the Details – For Rent, Lease or Buy.
 
·  RJG Series
·  32,956 total frame hours, (l... Additional Details & Photos

2008 Cat D10T, RJG series, Low Hour component History, Erops, U Blade w/ twin Tilt, rear Cwt, Very good condition, from reputable outfit. Read the Details – For Rent, Lease or Buy.
 
·  RJG Series
·  41,369 total frame hours (So... Additional Details & Photos

2007 Cat D9T, 12,100 original frame hours, 3,591 idle hours, 309 hours on Reman Engine from Cat Dealer. Semi U Blade, Multi Shank Ripper, extra Clean, ready to go. For Rent/Lease or Buy.  - Read the Details -
 
·  12,100 original frame ho... Additional Details & Photos

2014 Cat D6T XW, VPAT. only 906 original hours, 302 idle hours, GPS Ready, Erops, A/C, Diff Steer, 6 way blade, as close to New as you will find, Super Clean.  Rent / Lease or Buy  
 
• RCW serial number prefix
• 906 Total Hours, ECM ... Additional Details & Photos

2014 Cat D6T LGP, only 3,995 original hours, Erops, A/C, Sweeps, Diff Steer, Cat System 1 UC, One Owner, Super Clean, Cat Dealer Maintained, read the details. Rent / Lease or Buy  
 
· ZJB serial number prefix
· 3,995 Total Hours
... Additional Details & Photos

2012 Cat D6T LGP, VPAT, only 3,975 hours, Accugrade GPS Ready. Cat Factory Warranty until 2018. Erops, A/C, Diff Steer, good UC, Original, Super Clean Machine. Rent / Lease or Buy  
 
·  KSB serial number prefix
·  3,975 Tota... Additional Details & Photos

2006 Cat D6R LGP, 7,328 total hrs, 5,167 Idle hrs recorded, Erops, A/C, Diff Steer, Sweeps, Good Undercarriage, Low Hour Pipeline machine. Ready to go.      Read the details -   
 
·  WRG serial number
&mid... Additional Details & Photos

2006 Cat D6R XW, 9,025 total hrs, 3,371 Idle hrs recorded, Erops, A/C, Diff Steer, Sweeps, Paccar PA56 Winch, Ready to go. Read the details -   

•   MRT serial number
•   9,025 Total Frame Hours, ECM verified
&bu... Additional Details & Photos

2004 Cat D6R XW, rigged to Eject SC17 Pull Scraper, 10,784 total Hours, 2,765 Idle Hours, many recent rebuilds. Erops, A/C, Diff Steer, Comes with Eject SC17 Pull Scraper, Rigged to the D6R, As nice as they come, hard to find package.  Ready to go.  Read the details -  ... Additional Details & Photos

2003 Cat D6R XW, 7,751 total hrs, 1,835 Idle hrs recorded, Erops, A/C, Diff Steer, Paccar PA56 Winch, Good Undercarriage, Retiring Farmer. Ready to go. Read the details -   
 
·  AEP serial number
·  7,751 Total Frame Hours, ECM verifie... Additional Details & Photos

1996 Cat D6H XW, 9KJ Series, 10,500 total hrs, Erops, A/C, Diff Steer, Drawbar, Trade-in from local Iowa owner-operator customer. Ready to go. Read the details -   
 
·  9KJ serial number
·  Trade in from local Iowa owne... Additional Details & Photos

1998 Cat D5C LGP, 4,700 hours, Power shift, Pedal Steer, 6 way blade, Open Canopy, Clean, Original Condition. Rent / Lease or Buy  
 
·  4,675 Hours
·  Open Canopy
·  Pedal Steer
·  PAT (6 Wa... Additional Details & Photos

1992 Cat D6H LGP, Local customer consignment. Erops, A/C, Diff Steer, equipped with rear mount tile plow. 4”& 6” boots. Very good UC.  Read the details -   
 
·  3YG04301 serial number
·  19,535 Tot... Additional Details & Photos

Being Built Now, 2002 Cat D11R, 7PZ series, Zero Hour Powertrain Plus Rebuild,  Rebuilt as needed - Engine, Transmission, Final Drives, Torque, New OEM Cat Rails & Pads, Erops, U Blade w/ twin Tilt - Read the Details –

· 7PZ Series, High Horse Ser... Additional Details & Photos

2009 Cat D10T, RJG series, low hour components, Erops, U Blade w/ twin Tilt, Single Shank Ripper, Very good condition, from reputable outfit. Read the Details -
 
· RJG Series
· 31,163 total frame hours, (low hr components, read below)
&mi... Additional Details & Photos

2009 Cat D8T, 8,350 original hours, 2,827 hrs at Idle, Erops, A/C, Diff Steer, Multi Shank ripper, SU Blade w/ Tilt. Excellent UC, Super Clean, and Service history since the day it was new. May be the cleanest used D8T we have had in a long time. Ready to go, for Rent/Lease or Buy Additional Details & Photos

2014 Cat D6T XW, VPAT, only 2,300 hours, Accugrade GPS Ready. Erops, A/C, Diff Steer, 100% New Cat Track Groups, One Owner, Original, Super Clean Machine. Rent / Lease or Buy  
 
· RCW serial number prefix
· 2,300 Total Hours
&mid... Additional Details & Photos

2005 Cat D6R LGP, 6,409 total hrs, 1,760 Idle hrs recorded, Erops, A/C, Diff Steer, Good Undercarriage, Low Hour machine. Ready to go. Read the details -   
 
·  ADE serial number
·  6,409 Total Frame Hours, ECM verifie... Additional Details & Photos

2005 Cat D6R XW, 6,900 total hrs, 1,568 Idle hrs recorded, Erops, A/C, Diff Steer, Drawbar, 435 hrs on New Undercarriage, $63,000 in component rebuilds by Cat Dealer in last 200 hrs. Service paperwork available, Ready to go.      Read the details -  &nbs... Additional Details & Photos

Wheel Loaders

1994 Caterpillar 992D, A01719, only 2,000-hour components, 100% New Rubber, High Lift Arrangement, 7MJ Serial number prefix, USA made, 3412C series engine upgrades, Enclosed Cab, A/C, Joystick Control. 12.5 Yard Spade Nose Bucket w/ Recent Edge and Floor installed. Brand New 45/6... Additional Details & Photos

2012 Deere 844K Wheel Loader, 11,238 frame hours, Matching Michelin XHA Radial Rubber, 7 yard, GP bucket w/ edge, Deere Dealer Inspected and Tested, Nice machine.  Read the details!

· Original Paint
· 11,238 Frame Hours
· Enclosed C... Additional Details & Photos

2012 Cat 966K Wheel Loader, 5,230 frame hours, 2,505 Idle Hours recorded, good rubber, Quick Coupler, 5.5 yard, GP Bucket, Aux Hydraulics, Excellent Machine. Read the details!

·  Original Paint, excellent condition
·  5,230 Frame Hours
Additional Details & Photos

2014 Cat 950K Wheel Loader, 3,510 frame hours, 1,223 Idle Hours recorded, Matching Bridgestone Rubber, Hydraulic Quick Coupler, GP bucket w/ Edge, Excellent machine. Read the details!

·  R4A Serial Number Prefix
·  Original Paint, original... Additional Details & Photos

2002 Cat 950G Wheel Loader, 10,700 frame hours, Original paint, Good rubber, Quick Coupler, Aux Hydraulics, 3.5 yard, GP Bucket, Excellent machine. Read the details!

·  Original Paint, excellent condition for age
·  10,700 Frame Hours
Additional Details & Photos

2012 Cat 938H Wheel Loader, 3,300 frame hours, 2,041 Idle Hours recorded, only 1,277 actual hours in operation. Super Low Utilization, excellent rubber, Fusion Hydraulic Coupler, Auxiliary Hydraulics, GP Bucket, Ride Control, Excellent Machine. Read the details!

&bull... Additional Details & Photos

1994 Cat IT28F, 3rd function hydraulics, quick coupler, GP Bucket, Original Paint, 10,900 hrs, runs and operates very well. Read the details!

•  3CL Serial Number Prefix
•  Original Paint
•  10,900 Hours
•&nbs... Additional Details & Photos

2012 Cat 980K Wheel Loader, 8,867 frame hours, 1,635 Idle Hours recorded, Matching Michelin XHA Rubber, 7 yard, GP bucket w/ Edge, Scale, TA2 tested, Good history, Excellent machine, Read the details!

·  W7K Serial Number Prefix
·  Origina... Additional Details & Photos

2010 Cat 980H, 10,800 frame hours, 7 Yard, Straight Edge bucket w new cutting edge. Ride Control, Auto Shift, all options installed, very good condition.  Read the details!

·  JMS Serial Number Prefix
·  Original Paint, Origi... Additional Details & Photos

2007 Cat 966H Wheel Loader, 8,100 frame hours, 2,951 Idle Hours recorded, 100% New Rubber, 5.5 yard, GP Straight Edge bucket w/ teeth, County Machine. Read the details!

·  Original Paint
·  County Owned Machine
·  8,100 Fr... Additional Details & Photos

Tractor Backhoes

Just In, 2011 Cat 430E IT, Original Owner, Dealer Maintained, only 5,380 original hrs, of those, the ECM verifies 3,040 hrs were at idle, this loader only has 2,340 hrs actual running time, 4WD, Full Options, Aux Hydraulics, Tool Carrier, GP bucket., Priced to Sell. Read the Details!

&nbs... Additional Details & Photos

Off-Road Trucks

2011 Caterpillar 740B, 7,248 Frame hours, 2,753 hours at Idle, A/C, Very good radial tires, Tailgate available, super clean truck ready to go. Read the details:
                   ... Additional Details & Photos

2011 Caterpillar 740B, 6,825 total frame hours, 2,692 hours at Idle, A/C, Very good Radial tires, Tailgate available, super clean truck Ready to go. Read the details:
 
·  Well maintained
·  6,825 documented frame hours
&... Additional Details & Photos

2011 Caterpillar 740, 7,890 Frame hours, 2,922 hours at Idle, A/C, Radial
Tires, Tailgate available, Clean truck, Ready to go. Read the Details:

•   Well Maintained
•   7,890 documented Frame hours
•   2,922 ... Additional Details & Photos

2001 Caterpillar 730, Rigged up with a Ground Force Manufacturing, 30EFLT Fuel and Lube Body. Original Paint, Hard to find unit, ready to go. Read the Details:
                   &... Additional Details & Photos

Cat 777D Mining Trucks, “SSR” Scheckel Series Reman Machines. Full Specs, Full Rebuild Units, Full Warranty, Building daily for stock, Call or Email to Reserve your Truck Today, Limited Availability of Core Machines. The highest quality, most detailed, most complete machine rebuild pr... Additional Details & Photos

Qty (4) (1) 2001 Cat 777D, AGC series. Matching set of trucks, from the same operator, all trucks bought new together. Some very low hour components, Good Rubber, All Options installed. Hard Steel lined boxes w/ chock bars. Thes... Additional Details & Photos

2006 Caterpillar 740, B1P Series, 12,200 Frame hours, Original Paint, 1 Owner since New, Full service history available. Fully Loaded, A/C, Emergency Steer, Good 29.5-25 Rubber, Tailgate. Very solid mechanically, Ready to go. Read the Details:
 
· W... Additional Details & Photos

2012 Caterpillar 740B, 9,059 Frame hours, 3,031 hours at Idle, Original Paint, Fully Loaded, A/C, 90% Radial Tires, super clean Truck Ready to go. Read the Details:
 
· Well Maintained
· Original Paint, Original Condition Truck
&m... Additional Details & Photos

2013 Caterpillar 740B, 7,555 Total frame hours, 2,088 hours at idle, A/C, 100% New radial tires, Factory tailgate, Super clean truck. Ready to go. Read the details:
                  &n... Additional Details & Photos

Scrapers

Qty 3 Available, New Conversions, Cat 631C scrapers converted to Pull, 30 yard capacity. Refurbished as needed, 100% hydraulic cylinders rebuilt. Engineered, proven neck design.   Read the Details -
 
30 ... Additional Details & Photos

2001 Caterpillar 627G, From a good Nebraska Home, Push Pull, Erops, A/C, Original Paint, Good Matching 33.25+29 Rubber, Clean Scraper, Ready to go. Read the Details:
 
·  Well Maintained unit, AXF serial number series
·  20,549 total fr... Additional Details & Photos

Qty (4) (2) 2003 Noble 417B, 17 yard, pull scrapers, Low overall hours, Original condition, these Noble Brand scrapers are the best on the market, they are purpose built, extreme duty, Eject style construction scrapers. All replacement parts rea... Additional Details & Photos

Excavators

2005 Cat 365CL, 8,600 hours, with full oil samples and service history since the machine was near new. From Reputable Customer Trade In, 11’ 10” Stick, Hydraulic Cwt Removal device, Long and wide, expandable UC, c/w 82” bucket. Super clean, low hour, original condition machine, ... Additional Details & Photos

2014 Cat 336EL H, only 2,250 original hrs, Fully Loaded, 10’ 5” Stick, Auxiliary Hydraulics w/ factory work tool control program, Hydraulic Progressive Thumb, Pattern Changer, c/w 48” bucket. Read the Details, Rent/Lease or Buy.  -
 
·... Additional Details & Photos

2005 Cat 325CL, 5,480 Original hrs, 1,171 Idle Hours, Fully Loaded, Auxiliary Hydraulics, 9' 6" Stick, Long and wide UC, c/w 26" bucket, Runs and Operates very good.  Read the Details -
 
•  5,480 original hrs, ECM Verified
•  1,171 I... Additional Details & Photos

Just in, one owner, 2011 Cat 349EL, only 4,600 original hrs, Fully Loaded, 11” Stick, Quick Coupler, Long and wide UC, Pattern Changer, Auxiliary Hydraulics, c/w 44” bucket. Very clean, original condition machine, service history since new! Read the Details -
 
·... Additional Details & Photos

Just in, 2013 Cat 329EL, only 4,780 original hrs, Fully Loaded, 10’ 6” Stick, Auxiliary Hydraulics, Long and wide UC, Pattern Changer, c/w 32” bucket. Very clean, original condition machine!  Read the Details , for Rent, Lease or Buy.
 
&mid... Additional Details & Photos

2011 Cat 324EL, only 2,100 hrs, Fully Loaded, Auxiliary Hydraulics, Quick Coupler,  9’ 9” Stick, Long and wide UC, Pattern Changer, Rear view Camera, c/w 77” bucket, Extra clean, Single Owner machine!

Read the details:

·  2,100 o... Additional Details & Photos

2012 Cat 320EL, only 2,200 hrs, Fully Loaded, 9’ 6” Stick, Long and wide UC, Pattern Changer, Rear view Camera, c/w 46” bucket, Very clean machine! Read the Details -
 
·  2,200 original hrs
·  Machine does not have A... Additional Details & Photos

Dump Wagons

(2) Available. 2014 Smithco CP30, Off road side dump trailer, 30 Ton, or 25 yard Capacity, 30,000 pound tandem axles, AR400 Steel Tubs, Dump off either side, Pull Single, or hook 2 together and pull tandems.

These trailers are built off road construction duty, these trailers weigh 20,... Additional Details & Photos

Telehandlers

2012 Caterpillar TL943, only 4,200 total hours, 2,644 hours were at Idle as indicated by the ECM.  Original Paint, Enclosed Cab, A/C, 1 Owner since New, Fully Loaded, Outriggers, Foam filled tires, ready to go!  Rent, Lease or Sale.  Read the Details: Additional Details & Photos

Aggregate Equipment

2007 Screen Machine Industries 516T, only 2,800 hrs, Mobile Track, 3 way Screen Plant, 600 Tons per Hour capacity, Remote control, Original Paint, excellent condition!  Rent / Lease or Buy  
 
· Only 2,800 hours
· Original Paint, ... Additional Details & Photos

2007 Screen Machine Industries 4043T, Mobile Track Mounted Impact Crusher, 300 Tons per Hour, Completely Refurbished, 4,900 hrs, Remote control, Side Stacker & Magnet Options. Half the Price of New.  Rent/Lease or Buy  
  Additional Details & Photos

2011 KPI, 11-3060 Mobile stacking conveyor, hydraulic drive, plugs into mobile crusher or screen units with auxiliary hydraulic functions. 30” wide belt, 60 foot length, single axle tires that will pivot and turn to operate as a radial stacker if needed, Pintle Hitch, No Cracks, Good Belt, ... Additional Details & Photos

2011 KPI, 4250, Mobile Track Mounted Impact Crusher, closed circuit, 500 Tons per Hour, 4,730 total frame hrs, 1,298 idle hours. 440 horsepower Cat C13 Engine Radio Remote control, Side Stacker, return conveyor. This is as clean as you will ever find them, well maintained unit, still in original ... Additional Details & Photos

On Road Trucks & Trailers

Just In, 1990 Trail King TK100DGP, 50 ton detachable gooseneck trailer, has had 2016 annual inspection, 24’ Deck, 3 Axle, Air Ride, Pony Motor Hydraulics, Good old trailer.

Read the Details!
· Owner Retired, Local I... Additional Details & Photos

Just traded in, 2013 Kiefer Built 2500PT, 15 Ton Tag Trailer. 25’ Flat deck, 5’ tail, 100% galvanized, air brakes, very low use since new. Was priced over $32,000 new. Excellent condition. Read the details!
 
· ... Additional Details & Photos

Since 1946 Eager Beaver Trailers® has been manufacturing the highest quality construction equipment trailers from 5-60 ton capacities. No other trailer company provides the latest technology innovations and offers more standard features on detachable lowboys than Eager Beaver Trailers®. T... Additional Details & Photos

Motor Graders

 2010 Cat 140M VHP motor grader, 6 Month Cat Warranty, 4,900 frame hours, 1,188 Idle Hours recorded, Good  Rubber, 14’ moldboard, TA2 tested, Good history, Excellent machine, as nice as they come.  Read the details!

·  B9D Serial Number Prefix
&mi... Additional Details & Photos

Compaction Equipment

2012 Cat CP56, 84” Vibratory pad foot, 3,260 hrs, Enclosed Cab, Front blade option, Original Paint, Very well maintained machine w/ history, Fully Serviced and ready to go. For Sale or Rent.
Read the details!

· Original Paint, excellent condition Additional Details & Photos

2012 Cat CS56. 1,597 hrs, Original Paint, 84” Vibratory smooth drum, Open Cab, good Tires, Very well maintained machine, for Sale or Rent. Read the details!

·  Original Paint, excellent condition
·  1,597 Hours
·  Op... Additional Details & Photos

2007 Cat CS563E. Original Paint, 84” Vibratory smooth drum, Open Cab, New Tires, 4,939 hours, Very well maintained machine, for Sale or Rent. Read the details!

·  Original Paint, excellent condition
·  4,939 Hours
· ... Additional Details & Photos

12' 60x60 Double Drum Sheepsfoot Roller. Round style feet.

We invite your own personal, or 3rd party inspection of this roller anytime, located at our facility in Bellevue, Iowa.  Nationwide Delivery, Export, and Financing available at very good rates. Call Josh @ 563-872-4112 or... Additional Details & Photos

#A01272
Empty weight 18,300 lbs
Weight when filled 29,200 lbs

Nationwide Delivery and Financing available at very good rates. We invite your call, visit to our facilities, or complete inspection of this roller anytime. Call 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Bros 60”x60” Double Drum Pull Behind Sheepsfoot Roller A02104, Round style feet measure 2"+2” at the tips. Total feet length is 7”, Bearings good, Good solid frame, Very nice roller. These are $39,000 new.

Nationwide Delivery and Financing available at very... Additional Details & Photos

2013 Cat CP56B, 84” Vibratory pad foot, 2,460 hrs, Open Cab, Front blade option, Original Paint, Very well maintained machine, Fully Serviced and ready to go. For Sale or Rent.  Read the details!

· Original Paint, excellent condition
· 2,... Additional Details & Photos

Hercules 48”x40” Double Drum Pull Behind Sheepsfoot Roller A02058, Round style feet measure 2.5"+2.5” at the tips. Bearings appear good, good solid frame, good cleaners, Very nice older roller. These are $24,000 new.

Nationwide Delivery and Financing available at... Additional Details & Photos

Disks & Plows

14 foot cutting width, Hydraulic Adjustable Hinge Angle offset disk, 27" blade diameter, 10 Blades on front, 10 blades on rear, 14" blade spacing. 14 ft cutting width, Blade cleaners. Good Bearings and nice clean disk in excellent condition. Total weight is 14,500 pounds. Recommended tractor size... Additional Details & Photos

9 foot wide offset disk, 28" serrated blades, 12 Blades on front, 12 blades on rear, 9" spacing. 8 ft cutting width, Transport wheels, Hydraulic raise, New Hydraulic Hoses, Blade cleaners. Good Bearings and nice clean disk. (Please note, 2 blades are broke or missing in total on this disk, All ot... Additional Details & Photos

Attachments ~ Buckets

Factory Cat Brand, 42” wide, 2,12 cubic yard, F family linkage,  Qty 5 Cat side pin style teeth in good condition, No side cutters installed but holes there, bottom wear strips, lift eye, comes with both pins, minor crack where side cutter bolts on. Solid bucket otherwise. 

... Additional Details & Photos

New side cutters, qty 5 like new cat style side pin teeth, comes with both bucket pins, very solid bucket, bottom wear strips.

 

... Additional Details & Photos

Used Base Edge Cuttoff 988F wheel loader, spade nose bucket, good solid condition, has bolt on cutting edge attached. Would make a good bucket retrofit piece, or spade nose replacement.

... Additional Details & Photos

Brand New, TL Brand Bucket, 75” wide, 4 cubic yard capacity, General Duty Bucket, TB family linkage, Qty 6 teeth, bottom & back wear strips, Bucket is new and fits the TB linkage, found on the Cat 345BL, Cat 345CL, Cat 345DL series machines, and also the Cat 349EL series machines. Bucke... Additional Details & Photos

Used Entek Brand, 84” wide on the inside, 5 cubic yard capacity, Heavy Duty Bucket, VB family linkage, Qty 6 teeth, Comes with set of Pins, Bucket is Used and fits the VB linkage, found on the Cat 365BL, and Cat 365CL series machines, Bucket weighs 7,600 pounds. The bucket is very solid and... Additional Details & Photos

Cat Part # 346-0839, Replaces part # 269-2631. Good Used Cat 30” Bucket. Fits to the CB Linkage, found on Cat 324D, 324E, 329D, and 329E excavators. 1.43 yard capacity, 5 teeth, K Series, w/ cutting edge welded across for leveling. Lift Hook on rear, Good used condition, Cat OEM List price ... Additional Details & Photos

A02041 ~ CAT 24” backhoe bucket, Part # 254-8941, fits to all Cat Backhoes, 416, 420, 430 model machines. Good solid condition, New OEM cost is $ 1,818. Nationwide delivery available. Located in Bellevue, Iowa. Call Josh at 563-872-4112 or email sales@jjscheckel.com.

... Additional Details & Photos

A02126~ New CP, 48” Bucket, s/n J000039154-1. Fits Cat DB Linkage, found on Cat 336EL, 336DL, and 336FL Excavators. Nationwide delivery available. Located in Bellevue, Iowa. Call Josh at 563-872-4112 or email sales@jjscheckel.com.

... Additional Details & Photos

Attachments ~ Blades

Jones Brand Cushion Blade to fit Cat D10N, R or D10T, very good Blade Face & Cutting Edges, Main blade Pin bores were lined bored and machined in our shop, New pins and Bushings installed where needed, End Caps, good rubbers on cushion, Sandblasted and Painted, Good Solid, hard to find blade ... Additional Details & Photos

Cat / Balderson Brand Cushion Blade to fit Cat D10N, R, or D10T. Very good Blade Face & Cutting Edges, Main blade Pin bores and joints are tight with minimal movement. End Caps, good rubbers on cushion, Sandblasted and Painted, Good Solid, hard to find blade that’s ready to go. We ship ... Additional Details & Photos

S/N 1MP00614, AR#108-8280, U blade, moldboard only, hardweld and plates on face, good cutting edge, has stabilizer cross tube, has bottom blocks for blade arms, average condition, has some minor rust and minor cracks.

... Additional Details & Photos

S/N 1MP00647, Ar# 108-8280, complete cat U blade off D9R, excellent face, good cutting edge, LH blade arm complete with stiff arm, RH blade arm complete with tilt cylinder, cross stabilizer tube complete, very nice, low hour blade assembly, high spill guard.

... Additional Details & Photos

No s/n found, came off D9N, SU moldboard only, very nice and clean face, fair cutting edges, spill rack cut off, has bottom blocks for push arms. Solid blade.

... Additional Details & Photos

SU moldboard only, cutting edge like new, excellent face, very solid and clean, came off Cat D9R, low hour blade, has bottom blocks for push arms.

... Additional Details & Photos

Part numbers 9J-6677 & 9J-6678 Blade Push Arm Group, very clean set of push arms with blocks for attaching to blade.

... Additional Details & Photos

A01939 – Cat D9L, Cross Tube, part #9J6061, Stabilizer link for blade. Good solid condition, new cost $ 6,619

Nationwide delivery available.
... Additional Details & Photos

A01938 – Cat D9L, Push arms set, part numbers 9J6677 & 9J6678, Blade push arm group, very clean set of push arms with blocks for attaching to blade. Price - $5,000

... Additional Details & Photos

A01940 – Cat D9L Blade Brace, part # 3G-7845, good solid condition, new cat price $ 14,142. Price - $1,800

Nationwide delivery available.

... Additional Details & Photos

900 hrs since NEW. Angle Blade complete, off Cat D6T XW with 900 hrs, Complete w/ Twin Tilts, C Frame, Blade & Caps. Very solid and clean condition. Face is excellent, Will ship nationwide. Fits intermediate gauge Cat D6R and D6T Tractors.

... Additional Details & Photos

SU Blade Moldboard, Cat Blade Group # 4Z9229, and 4Z9226, Cat Blade Assembly # 143-0499, and 4Z9230. Extremely hard to find, SU dozer for XW series D6R and D6T tractors. New End bits and Edge, Blade face has been plated, could use new face to make clean, has some punctures as you will see in the ... Additional Details & Photos

A02131 ~ CAT D6R / D6T, SU Blade
SU Blade Moldboard, s/n 1TP00828, Arrangement # 108-3975. SU dozer moldboard only for D6R and D6T tractors. Blade face is clean and straight, could use new face to make clean, has some punctures as you will see in the pictures. Will ship nationwide.

... Additional Details & Photos

S/N 3WL38579, moldboard only, good edge, face averages .45 thick, has been measured by Cat dealer with ultrasound, very solid and clean face.

... Additional Details & Photos

Cat / Balderson Brand, Cushion Blade, very good Blade face, New outside Cutting Edges to be installed, Pin bores were lined bored, New pins and Bushings installed where needed, End Caps, good rubbers on cushion, Sandblasted and Painted, Good Solid, hard to find blade that’s ready to go. We ... Additional Details & Photos

S/N A6B, Ar# 257-8309, Angle Blade complete, off Cat D6R LGP with 5,900 hrs, Complete w/ Twin Tilts, C Frame, Blade & Caps. Very solid and clean condition. Face is excellent. Will ship nationwide. Fits LGP series Cat D6R and D6T Tractors.

... Additional Details & Photos

Attachments ~ Brush Sweeps

Brand New, Factory style aftermarket brush sweeps, fits to all Cat D6N open cab tractors, these are heavy duty. We ship nationwide. 

... Additional Details & Photos

A02039 ~ CAT D6T Factory Sweeps, part # 237-9318, Complete set, took off KJL series D6T, good solid condition, New OEM cost is $10,800. Nationwide delivery available. Located in Bellevue, Iowa. Call Josh at 563-872-4112 or email sales@jjscheckel.com.

... Additional Details & Photos

Attachments ~ Rear Screens

Brand New aftermarket, rear screen to fit all Cat D6R series 2 tractors, heavy construction. We ship nationwide.

... Additional Details & Photos

Brand new aftermarket, rear screen to fit all D5N and D6N Enclosed cab tractors, heavy construction. We ship nationwide.

... Additional Details & Photos

#3W3057, Brand new aftermarket, rear screen to fit all Cat D6H and D6R series 1 tractors, heavy construction, we ship nationwide.

... Additional Details & Photos

A02040 ~ CAT D8T, Rear screen, part # 219-2892, good solid condition, new OEM cost is $3,175. Nationwide delivery available. Located in Bellevue, Iowa. Call Josh at 563-872-4112 or email sales@jjscheckel.com.

... Additional Details & Photos

Attachments ~ Counterweights

A01951 - CAT D10R / D10T Rear Counterweight, part number 6T-3583, removed from D10R, Good condition, complete with brackets, Cat Price $18,658. Price - $8,500

... Additional Details & Photos

CAT D10N / D10R / D10T Rear counterweight, very good condition. 

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Counterweight removed from D10R, good condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Counterweight removed from D10R, good condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Counterweight removed from D10R, good condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Counterweight removed from D10R, good condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Counterweight removed from Cat D9L, good condition, missing rear hitch clevis.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Counterweight removed from Cat D9L, good condition, missing rear hitch clevis and hanger brackets.

... Additional Details & Photos

Came off 84X series Cat 245, very clean condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Part number 6Y-0610, very clean condition, rear counterweight removed from Cat D8R. Fits to D8N / D8R / D8T. Cat list price is $10,500.

... Additional Details & Photos

Attachments ~ Drawbars

Bolts and pins on tractor, drawbar attachment, no rear clevis. Good condition. 

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Bolts on, and pins on the bottom, custom fabricated. Good condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Brand New, for Eject Scraper, bolts on tractor, pins on bottom, and accepts Eject scrapers.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Don’t know what it fits, looks like D9H.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Cat Drawbar originally off Cat D9L, We professionally converted to Fit to the Cat D10R, and Cat D10T Tractors, Pin on Style, with top brackets that bolt on. We use these drawbars for pulling pull scrapers.

... Additional Details & Photos

Very good condition, fits Cat D6M, and D6N tractors, list price is $1,200.
Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Part #3W2182, very good condition, fits Cat D6H, D6R and D6T tractors, list price is $1,200.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Cat D6N Drawbar, very good condition, fits cat D6N.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Attachments ~ Hydraulic Hammers

A02137~ Unused, 2005 Cat H180CS Hammer, s/n 9PM04037. As-New hammer, came from dealer unsold inventory, 12,000 ft pound energy class, 9,000 pound weight, 275-450 blows per minute, 7.07” tool diameter, 58-79 gallons per minute required, 2,320 – 2,175 psi pressure required. Fits Cat 349... Additional Details & Photos

A02247~ 2011 Cat H120CS Hammer, s/n 09MM05502.  Fresh Cat Dealer Rebuild, Unused since $10,603 Spent, have service paperwork and invoice available.  Mole Point Tool Bit, 3,500 ft pound energy class, 3,800 pound weight, 350-620 blows per minute, 4.70” tool diameter... Additional Details & Photos

A02248~ Cat H65DS Hammer, s/n BYT00808, Good used hammer, Pin On,  New Chisel Tool Bit, 800 ft pound energy class, 650 pound total weight,  720 – 1740 blows per minute, 2.68” tool diameter, 10-30 gallons per minute required, 1,450 – 2,400 psi pressure ... Additional Details & Photos

Top Bracket for Cat H120 Hammer, B Linkage, found on Cat 320 & 322 excavators. 12” Wide between ears, 17.5” pitch center of pin, to center of pin, and 3” pin diameter. Good used condition, with pins included. We ship nationwide, we accept credit cards.

... Additional Details & Photos

A02138~ Unused, 2006 Cat H130S Hammer, s/n 7CM04416. As-New hammer, came from dealer unsold inventory, 4,500 ft pound energy class, 4,500 pound weight, 320-600 blows per minute, 5.1” tool diameter, 32-58 gallons per minute required, 2,050 – 2,150 psi pressure required. Fits Cat 320EL ... Additional Details & Photos

A02246~ 2007 Cat H140DS Hammer, s/n BXB00685. Fresh Cat Dealer Rebuild, Unused since $15,032 Spent. Have service paperwork and invoice available.  New Chisel Tool Bit, 6,000 ft pound energy class, 5,500 pound total weight, 325-540 blows per minute, 5.49” tool diameter,... Additional Details & Photos

A02139~ 2013 Cat H120ES Hammer, s/n HHE00495. Good used hammer, New Chisel Tool Bit, New Hyd Hoses, 3,500 ft pound energy class, 3,800 pound weight, 350-620 blows per minute, 4.70” tool diameter, 26-45 gallons per minute required, 2,050 – 2,150 psi pressure required. ... Additional Details & Photos

Attachments ~ Disk Parts

New 36” notched blades, 20” spacing, 4 blades total, includes axle and 2 bearings. All rebuilt and ready to go.

... Additional Details & Photos

New 32” notched blades, 14” spacing, 4 blades total, axle, and 2 bearings. All rebuilt and ready to go.

... Additional Details & Photos

New 32” notched blades, 14” spacing, 4 blades total, axle, and 2 bearings. All rebuilt and ready to go.

... Additional Details & Photos

Used blades measure 30”, 14” spacing, comes with 6 blades total, axle, and 2 bearings. Ready to bolt on.

... Additional Details & Photos

Attachments ~ Engines

Fits Cat D400E, taken out of Cat D400E haul truck, ar# 119-5723, Core Engine, non running, Block condition appears good, cylinder heads appear good, no turbo, exhaust manifold looks good but missing some bolts, no alternator, no starter, no ECM, injection pump complete but missing 3 injection lin... Additional Details & Photos

Fits Cat D6R/D6H/D7R, s/n 0R3706, engine block 7N-5456, incomplete non running engine, block appears good, cylinder heads appear complete, turbo appears complete, exhaust manifold appears complete, oil cooler, no alternator, no starter, no ECM, injection pump appears complete, water pump appears ... Additional Details & Photos

Fits Cat D11R , s/n- 2GR01400, ar#100-8111, non running core engine, Block appears good, cylinder heads appear complete, turbo appears complete, exhaust manifolds appears complete, oil cooler and alternator appear complete, qty (2) starters appear complete, has 1 air cleaner, injection pump appea... Additional Details & Photos

Fits Cat D9R, s/n 5XD00812, Ar# 163-5784, was running engine that had block punched out for government emissions exchange program, Block has hole punched in it, cylinder heads complete, turbo is incomplete, exhaust manifolds appear complete, oil cooler, no alternator or starter, ecm appears compl... Additional Details & Photos

Attachments ~ Final Drive, Brake

Rebuilt Caterpillar D8R Steering Clutch & Brake Group, Cat Part # 6Y-3588, or Reman # 0R-4802. This unit has been fully rebuilt with OEM parts, and ready to go. Cat price on Reman is $ 5,147, with an extra $3,727 core charge. Our Price - $3,800

This unit sells outr... Additional Details & Photos

Attachments ~ Fuel Tanks

Part 114-5633 Tank GP & 116-3307 Tank As, Cat list price $11,000. Good used tank, that has been straightened, looks excellent. Clean, straight, and painted.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

A02038 ~ CAT D8T, Fuel Tank Gaurd, Part # 209-3862, complete set, good solid condition, original OEM, New OEM Cost is $ 2,250. Nationwide delivery available. Located in Bellevue, Iowa. Call Josh at 563-872-4112 or email sales@jjscheckel.com.

... Additional Details & Photos

Attachments ~ Hydraulic Cylinder

Lift cylinder for Cat D9L Dozer, Good Condition, New cost $12,600.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Lift cylinders for Cat D9L Dozer, Good Condition, New cost $12,600.

 

Nationwide delivery available. Located in Bellevue, Iowa. Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Lift cylinder for Cat D9L Dozer, Good Condition, New cost $12,600.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Lift cylinder for Cat D9L Dozer, Good Condition, New cost $12,600.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Cat 245 Boom Lift Cylinder, Cat Cost $17,438, good used condition, taken off running machine.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Cat 245 Boom Lift Cylinder, Cat cost $13,837, good used condition, taken off running machine.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

D9L Ripper Tilt Cylinder Group, good used condition, ripper tilt cylinder, same as 0R-0885. Cat cost $3,900. Reman cost $748.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Cat cost $5,228. Good solid condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

D9L Lift Cylinder Yoke, Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Cat cost $ 5,228. Good solid condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Yoke Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Cat cost $5,228. Good solid condition. 

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Good used, takeoff lift cylinder cannons, Removed from Cat D9L, 14Y series tractor. Cat cost $5,228. Good solid condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Good used takeoff lift cylinder cannon, removed from D8R, 7XM series, Cat cost is $2,800. Good solid condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Cat 245 Bucket Lift cylinder, Cat cost $17,705, good used condition, taken off running machine.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Attachments ~ Quick Couplers

A02127~ New JRB Quick Coupler, Hydraulic Pin Grabber, s/n AKRPLR8STX13070. Fits Cat DB Linkage, found on Cat 336EL, 336DL, and 336FL Excavators. Nationwide delivery available. Located in Bellevue, Iowa. Call Josh at 563-872-4112 or email sales@jjscheckel.com.

... Additional Details & Photos

Part # 246-8115, Hydraulic Cat Brand Quick Coupler, fits Cat 345DL, comes with set of pins, good solid condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Attachments ~ Rippers

S/N Mam00300, four barrel, single shank ripper, removed from Cat D9T, complete with cylinders, brackets, hyd pin puller, new joint pins, back valve for tractor, and hyd hoses.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjschecke... Additional Details & Photos

S/N 5RP390, four barrel, single shank ripper, removed from Cat D9R, complete with cylinders, brackets, hydraulic pin puller, very nice, clean and solid ripper.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Brand new, industrial buckets brank ripper, for Cat D9R / D9T, aftermarket manufactured, very high quality, we have used a lot of these and have been good. New cylinders, new construction, comes with Ripper Shank. Priced to sell at Dealer cost.

... Additional Details & Photos

Complete four barrel, multi shank ripper, off D9R, comes with cylinders, brackets, transmission guards, 1 ripper shank, excellent, solid ripper.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Complete four barrel, multi shank ripper, off D9R, comes with cylinders, brackets, excellent condition, solid ripper.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Part # 9J-7359, removed from Cat D9L, 14Y series, used ripper mounting group, in good solid condition. Cat cost $9,400.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Part # 9J-7359, removed from Cat D9L, 14Y series, used ripper mounting group, in good solid condition. Cat cost $9,400

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Cat D9L Ripper brackets, left and right side, set of 2. Part #9J-7313 and 9J-7314. Good used condition.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

S/N 5RP1576, four barrel, single shank ripper, removed from Cat D9R, very solid condition, rebuilt joints, no hyd pin puller.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Diamond Manufacturing, Multi Shank Ripper w/ 2 shanks, Came off 2002 Cat D6R, Complete w/ cylinder, brackets, and 2 shanks. Very solid and clean original condition. Joints tight, No breaks or welds. Will ship nationwide. Fits all Cat D6H, D6R and D6T Tractors.

... Additional Details & Photos

S/N BRT1149, four barrel, single shank ripper, removed from Cat D10T, complete with cylinders, brackets, hyd pin puller. Very solid and low use ripper.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Attachments ~ Tailgates

New, JJ Scheckel Built, CAT 740 / 740B Tailgate Assemblies in Stock and ready to ship today.

Complete tailgate assembly with mounting kits, for Cat 740 or 740B Trucks. These are a greatly improved version of OEM, longer reaction arms for quicker opening, Hardox Steel for better durability... Additional Details & Photos

A02289 ~ CAT 740/740B Tailgate Assembly, Complete tailgate assembly off Cat 740, has some bends and dings as the pictures show, solid otherwise. Could use paint. Factory chain lift style tailgate, Comes with Bracket hinges for Truck, Chains, and Tailgate Complete with arms. Will not include the m... Additional Details & Photos

Attachments ~ Transmissions

S/N 4XT00338, complete grp off Cat D400E, included torque Group part # 1T-2027, and Assembly part # 6T-4434, Over $30,000 Cat cost on New. This unit was spare for fleet, used condition, but worked fine when removed from parts truck.

Nationwide delivery available. Located in Bellevue, Iowa... Additional Details & Photos

Trans s/n 2JE00555, Arr 9W-8392, Torque s/n 72T03303. Individual part numbers within this group include the following – 7G9039, 6P6875, 9W0740, 7G5851, 6P6911, and 9W8393. Total cost for this group is $117,000 Cat cost. Good used condition, not rebuilt, To fit Cat 826C, 86X series.

... Additional Details & Photos

S/N 4NA04432, Hydrostat Transmission for Cat 953, internal condition unknown, s/n 4NA04432, ar# 9J-5378, Fits cat 953, 20Z series, appears complete. Cat individual parts within this group cost $50,000. Should make good core for rebuild or parts. Price - $3,000

Nationwide delivery avail... Additional Details & Photos

Rebuilt Caterpillar D8L Transmission Housing Case, Cat Part # 3T-4574, 3T-4575, or 7G0379. This transmission housing has been fully checked to Cat Specs. In stock and ready to go. Cat price is $14,336. Our Price - $2,800

This transmission Case sells outright, No core n... Additional Details & Photos

Rebuilt Caterpillar D8N Transmission w/ Diff, Cat Part # 9W-9613, or Reman # 0R-4043. This transmission has been fully rebuilt with OEM parts, Dyno Tested and ready to go. Cat price on Reman is $ 27,035, with a $27,000 core charge. Our Price - $12,500

This transmission... Additional Details & Photos

Rebuilt Caterpillar D9L Transmission, Cat Part # 9P-2213, or Reman # 0R-4020. This transmission has been fully rebuilt with OEM parts, Dyno Tested and ready to go. Cat price on Reman is $27,035, with a $59,121 core charge. 

This transmission sells outright, no core needed to return! ... Additional Details & Photos

Attachments ~ Tracks and Tires

A02044 - A02047 – (New) Marcher 29.5+25 Tire, 4 available total, these are same tread pattern as Michelin XAD Tires, These are New Bias Ply, 34 Ply, E3/L3 tires, max load 44,0000 each. These are pretty well made units for a lot less money than name brand.

Fits Cat 9... Additional Details & Photos

A02093– (Used) Michelin X-Super Terrain 29.5+25 Tire, Radial, Virgin tread measures 18/32 remaining, or 33% Remaining. This is an E4 Tire with good clean sidewalls. Would make good spare tire. Holds air, no leaks, Came off Cat 740 Truck that we installed all new matching tires on.
Fit... Additional Details & Photos

A02095– (Used) Yokohama RT41, 29.5+25 Tire, Radial, Virgin tread measures 52/32 remaining, or 94% Remaining. This is an E4 Tire with good clean sidewalls. Would make an excellent, like new spare tire. Holds air, no leaks, Came off Cat 740 Truck that we installed all new, different style mat... Additional Details & Photos

Cat part # 7T-2394, Cat D8T, Complete set of 26” wide, extreme service track pads. Total of 88 pads, complete set for a machine. Grouser bars measure 62 MM on average, on the cat book scale of 120% being new, these pads are specing out at 77% remaining. Pads weigh 76 pounds each. Cat OEM Ne... Additional Details & Photos

A02094 – (Used) Michelin X-Super Terrain 29.5+25 Tire, Radial, Virgin tread measures 9/32 remaining, or 17% Remaining. This is an E4 Tire with good clean sidewalls. Would make good spare tire or core to retread. Holds air, no leaks, Came off Cat 740 Truck that we installed all new matching ... Additional Details & Photos

Attachments ~ Winches

Came off D10R, good used winch, w/ 1” cable, and mounting brackets. Model 59N, part number cross reference 6Y-0265, 6Y0275, 6Y0256, & 6Y0255.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Came off 7TL series D9R, winch model PA59HS-08685, s/n 9601477, Paccar 124-4496, no cable. Worked good when removed.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Complete, Like NEW Paccar PA56, slow speed winch w/ freespool, s/n 1302277. Taken off Cat D6T machine with less than 500 hrs, Cat Arrangement Part # 371-0954, Cat Group # 371-0956. Comes complete with the following -  Vertical and horizontal Roller Fairleads, factory Cat D6T Transmission Gua... Additional Details & Photos

A02239 – Allied W6G Winch, We took this winch off a 2006 Cat D6R. The Winch has then been Pressure tested and operated on machine prior to removal, and works excellent. This unit is complete with Factory D6 R/T brackets, electronic controls, handle, harness, and ECM. Cable in winch, but no ... Additional Details & Photos

Paccar PA56, s/n 0600449. Taken off Cat D6R machine with less than 4,500 hrs, Cat Arrangement Part # 279-6427, Comes complete with the following -  Winch, Complete wiring harness and control handle, PTO shaft,  Also comes with brackets for the D6R or T, and roughly 100’ of 1&rdquo... Additional Details & Photos

Paccar PA56, s/n 0600448. Taken off Cat D6R machine with less than 6,500 hrs, Cat Arrangement Part # 279-6427, Comes complete with the following -  Winch, Complete wiring harness and control handle, PTO shaft, Also comes with brackets for the D6R or T, and roughly 100’ of 1” cabl... Additional Details & Photos

Complete, NEW Paccar PA56, slow speed winch w/ freespool, taken off Cat D6T machine with less than 500 hrs, Cat Part # 371-0954, Comes complete with the following -  Vertical and horizontal Roller Fairleads, factory Cat D6T Transmission Guard part # 3W-1356, and Complete wiring harness and c... Additional Details & Photos

Attachments ~ Miscellaneous

Roll over protection assembly off Cat D9R, very clean condition, no welds or cracks.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Complete landfill pack off Cat D9R, comes with front track scrapers, and rear enclosure box.

Nationwide delivery available. Located in Bellevue, Iowa.
Call Josh at 563-872-4112 or email sales@jjscheckel.com

... Additional Details & Photos

Cat Part # 332-3814, Hood Arrangement, to Fit Cat 740B. This hood had a crack in it, and was repaired in house with fiberglass, and then repainted with polyurethane. Can’t tell from New. Cat OEM List Price is $8,593.

Will Ship Nationwide, credit cards accepted.   &nbs... Additional Details & Photos

Cat Part # 229-9714, Replaces part # 9V1795. Good Used Cat Material Handler Arm. Fits to many models, Cat IT28 Wheel Loaders, or Cat 430 Tractor Backhoes, or any machine with a matching Cat IT28 Style quick coupler. Adjustable length, good used condition, Cat OEM List price is $4,088.

We ... Additional Details & Photos

A02299 – Cat Pallet Forks, Factory Part Number 231-5194, adjustable position forks to fit Cat 950G, 950H, 962G, 962H, 966F, 966G, 966H wheel loaders, very solid and good condition, No welds or breaks. Original Paint.  Fork tines are 5’ in length, and 8” wid... Additional Details & Photos

A02034 – Rebuilt Cat D6H LGP, D6R LGP Equalizer Bar, part number 201-2078, 20R-0077, and also crosses with 8G-8977. Rebuilt and Line bore machined holes, New bearings, New seals. Cat cost new $ 6,588, Cat cost Reman $ 4,307 exchange. Our sale Price: $3,500 Exchange
Additional Details & Photos

Cat Part # 379-0000, Good Used Cat Pallet Forks, Fits to the Cat Fusion Quick Coupler, found on Cat 950K, 962K, 966K, 972K, Wheel loaders, and also on the Cat 963D Track Loaders. Tines are 72” long, and 7” Wide. This attachment weighs 3,100 pounds. Good used condition, original paint,... Additional Details & Photos

Tools & Shop Equipment

Caterpillar 150 gallon oil storage cart, pumps oil in and back out thru filter for refilling machines. Save component oil when servicing machine, filter it and reuse oil as you see fit. Heavy duty construction, measures 6’6” long, 2’ wide, came from Cat dealer shop, never used h... Additional Details & Photos