21582 Highway 62
Bellevue, Iowa, USA
2015 Cat 972M, Wheel Loader, A02497
2015 Cat 972M, Wheel Loader, 6,630 hours, 2,333 hours were at Idle. Good rubber, 6.8 yard, GP Bucket, Onboard Scale, Command Joystick controls, Full history, original paint, Matching Michelin Radials, Super Clean machine. For Rent, Lease or Sale!
· Excellent condition, full maintenance history since new.
· Original Paint
· ECM Stats
· 6,630 Frame Hours.
· 2,333 hours were Idle time, as recorded by ECM
· Only 4,297 actual hours in operation for this machine.
· Average Engine RPM’s for life of machine recorded at 1,055 RPM.
· Average Fuel Rate, for life of this machine was 3.54 Gallon per hour.
· Very Low, overall lifetime load factor of 21% on this machine
· GP Bucket w/ edge, 6.8 Yard capacity
· Aggregate Handler Edition (“ larger counterweight, and onboard scale “)
· Factory installed Payload Management System, scale
· Ride Control
· Product link equipped
· Air Condition, Heat
· Cat Command Joystick Steering
· Rear view camera
· Lighting Group
· Roading fenders
· Cold Weather Arrangement
· Auto Lube System
· Rotating beacon
· 337 HP, Cat C9.3 Accert Engine, Final Tier 4
· 54,800 lb operating weight
Finance programs available for this machine.
Rental Programs available for this machine.
Matching Michelin XHA2, 29.5+R25 Tires
· New Tread Depth 50/32
· Front LH tire measures 40/32nds, or 80% Remaining
· Front RH tire measures 35/32nds, or 70% Remaining
· Rear LH tire measures 37/32nds, or 74% Remaining
· Rear RH tire measures 36/32nds, or 72% Remaining
This 972M is super clean and tight. Everything on the machine works and operates as it should. This unit came from a good home, Cat Dealer had this machine on lease to large company since new. The machine has been maintained and serviced on schedule by cat dealer, all repair and maintenance history available since new. Pins and Bushings in the loader frame, and center are all tight with no excessive play. This machine has as low of utilization stats as you will find, lifetime average RPM and fuel rate is very low.
This machine is currently getting an extensive pre sale work order in our facility, including a full Cat TA2 technical inspection of all component pressures to cat spec, we are also servicing all oils and filters on machine, along with several other procedures. Please call or email for additional information that we can email you – this machine will be ready to go.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Additional pictures and Video available of this machine on our website, www.jjscheckel.com, Priced to sell wholesale.