21582 Highway 62
Bellevue, Iowa, USA
Phone: 563-872-4112
Fax: 563-872-5058

2006 Cat D6R LGP, VPAT, Crawler Tractor – A02516

Price: SOLD!


2006 Cat D6R LGP, 8,919 total frame hrs, 2,101 Idle hrs recorded, PAT 6 way blade, Erops, A/C, Diff Steer, Good Undercarriage, One Owner, Documented Maintenance history since new. GPS Ready. Read the details -   
·  WCB serial number, Series 3
·  8,919 Total Frame Hours, ECM verified
·  2,101 hours where at Idle, ECM verified
·  Only 6,818 actual operating hours on this machine
·  All Service History, and Oil samples, available since New 
·  Original condition, original paint
·  GPS Accugrade Ready, wiring and plugins
·  Enclosed Cab, A/C, Heat
·  Engine Enclosures
·  Diff Steer
·  PAT, power angle tilt, 6 way blade.
·  Good Undercarriage, see full report below.
·  Cat C9 Accert Engine, 210 HP
·  48,500 lbs, operating weight
·  13’6” blade width
·  Sandblast and Paint service, available for this machine, for additional $8,500
Undercarriage measures as follows, (Based on Cat spec 120% being New)
Cat OEM, System 1, Undercarriage on this machine
·  Rail/Chain height measure 96% Remaining
·  Links/Bushings on rails measure 100% Remaining
·  Pads/Grousers – 60% Remaining, 31” wide Track pads
·  Sprockets – 78% remaining
·  Front Idlers – 90% Remaining
·  Rear Idlers – 98% Remaining
·  Bottom Rollers average– 80% Remaining
This is a hard machine to find being one owner, and full documented history since new. If you want a good one, here it is. Was GPS Dirt machine for large Midwest Contractor. The machine is straight, clean and original. Good solid condition all the way around. Hours are original and verified thru the ECM download and service records. Power Angle Tilt Blade.

This machine is currently getting an extensive pre sale work order, including a full Cat TA2 technical inspection of all component pressures to cat spec, we are also servicing all oils and filters on machine, along with several other pre sale procedures. This machine will be ready to go. Please call or email for additional information that we can email you –

 We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Priced to sell!