21582 Highway 62
Bellevue, Iowa, USA
2008 Cat D10T Crawler Tractor, A02243
2008 Cat D10T, RJG series, Low Hour component History, Erops, U Blade w/ twin Tilt, rear Cwt, Very good condition, from reputable outfit. Read the Details – For Rent, Lease or Buy.
· RJG Series
· 41,369 total frame hours (Some low hr components, read below)
· Enclosed Cab, A/C, Heat
· Rear Counterweight, (Ripper available at extra cost $45,000)
· U blade w/ twin tilt
· Engine Enclosures
· Light Kit
· Fast Fuel Kit
· Clean sheet metal
· Cat C27, 646 HP Engine, Tier 3
· 147,000 lbs operating weight
Component Hours as follows:
· 9,539 hours on Engine
· 7,382 hours on radiator
· 10,179 hours on Torque Converter
· 10,649 hours on Transmission
· 12,894 hours on Left Final Drive
· 8,502 hours on Right final drive
· 3,597 hours on both track frame rebuilds
Undercarriage measures as follows, (Based on Cat spec, w/ 120% remaining being new)
Cat Brand UC components, part # 320-3054
· Rail/Chain height measure 80% Remaining
· Pads/Grousers measure 93% Remaining – 28” Wide Pads
· Sprockets measure 82% Remaining
· Qty 2, Front Idlers average 72% Remaining
· Qty 2, Rear Idlers average 62% Remaining
· Qty 16, Bottom Rollers average 87% Remaining
· We can install Rear SS Ripper at additional cost of $45,000
Rental Terms Available for this machine.
This machine is just in, from outfit that ceased operations, was under excellent preventative maintenance program. The machine is mechanically sound, This unit was not a Rock machine, prior usage was stripping overburden at mine site. Track frames are clean and solid. The Undercarriage has a lot of time left.
This machine is currently getting an extensive Pre sale work order, including a full Cat TA2 technical inspection of all component pressures to cat spec, All oils and filters on machine will be serviced as new, all systems and components will be checked and inspected, along with several other procedures. We also just freshly sandblasted, and painted the machine, with high quality OEM urethane paint and factory decals. Please call or email for additional information that we can email you – this machine will be ready to go.
We invite your own personal or 3rd party inspection of this machine anytime, located at our facility in Bellevue, Iowa. Priced to Rent, Lease or Buy!
Nationwide Delivery, Export, and Financing available at very good rates. Call Josh @ 563-872-4112 or email Sales@jjscheckel.com